10年間（2015-2025）の研究室の論文

  1. Gen Shibata, Haoyu Yuan, Yiroya Yamamoto, Shusuke Tanaka, Hideyuki Ogawa,　“Diesel Engine Performance and Combustion Imaging Analysis of Gas-to-liquid and Polyoxymethylene Dimethyl Ether Blended Fuels”, SAE International Journal of Fuels and Lubricants, 04-18-02-0010, February 12 2025
  2. Gen Shibata, Kensei Karumai, Suzune Sakai, Hideyuki Ogawa,　“Study on Oxidation Phenomena of Post-injection Fuel in Diesel Engines”, International Journal of Engine Research, DOI: 10.1177/14680874241263193, June 25, 2024
  3. Haoyu Yuan, Takuma Tsukada, Jumpei Nishino, Gen Shibata, Hideyuki Ogawa, 　“Study on combustion and exhaust emissions characteristics of oxymethylene dimethyl ether blends with Fischer-Tropsch fuels in diesel engines”, SAE Technical Paper 2023-32-0167, September 2023
  4. Takao Kawabe, Kazuhiro Inoue, Kazuma Mori, Tomoki Ishikawa, Yoshimitsu Kobashi, Gen Shibata, Hideyuki Ogawa, 　“Mechanism of the reduction in afterburning and thermal efficiency improvement with highly oxygenated fuels in diesel combustion”,   international Journal of Engine Research, Volume 24, Issue 10, September 19, 2023
  5. Hideyuki Ogawa, Kazuma Mori, Tomoki Ishikawa, Yoshimitsu Kobashi, Gen Shibata, 　“Improvement of diesel combustion with suppression of mutual fuel spray flame interactions with staged nozzle hole arrangement and a spatially divided combustion chamber”, Volume 24, Issue 9, August 18, 2023
  6. 小川英之，森一磨，石川友貴，小橋好充，柴田元，　“千鳥噴孔配置燃料噴射ノズルによる噴霧間干渉の抑制とディーゼル燃焼の改善”，自動車技術会論文集　54巻　3号 PP. 574-479 (2023)
  7. 軽米健成，坂井鈴音，柴田元，小川英之，　“ディーゼル機関におけるポスト噴射燃料の部分酸化現象の要因解析”，自動車技術会論文集　54巻　3号 PP. 467-472 (2023)
  8. Yuta Nakasaka, Keigo Kushima, Shunsaku Yasumura, Kenichi Shimizu, Keigo Tomita,Gen Shibata, Takao Masuda,　“Experimental studies on intracrystalline diffusion of NO and NH3 in Cu-CHA”, Catalysis Today, Volume 411, March 1, 2023, 113823
  9. Gen Shibata, Naoki Shibayama, Keita Araki, Yoshimitsu Kobashi, Hideyuki Ogawa, Yuta Nakasaka, Kenichi Shimizu,　“Steady-state kinetic modeling of NH3-SCR by  monolithic Cu-CHA catalysts”, Catalysis Today, Volume 411-412, March 1, 2023,  113797
  10. Haoyu Yuan, Takuma Tsukuda, Yurui Yang, Gen Shibata, Yosimitsu Kobashi, Hideyuki Ogawa,　“Effects of Chemical Compositions and Cetane Number of Fischer-Tropsch Fuels on Diesel Engine Performance”, Energies 15(11) 4047, May 31, 2022
  11. Jun Goto, Yosimitsu Kobashi, Yusuke Matsumura, Gen Shibata, Hideyuki Ogawa, Naoyuki Kuragaki,　“Spark knock suppression in spark ignition engines with hydrogen addition under low and high engine speeds”, International Journal of Hydrogen Energy, Volume 47, Issue 41, Pages  18169-18181, May 12, 2022
  12. Gen Shibata, Yuanzhe Li, Yoshimitsu Kobashi, Hideyuki Ogawa,　“Oxidation phenomena of diesel post fuel in the expansion stroke”, International Journal of Engine Research, Volume 24, Issue 3, January 28, 2022
  13. Kazuki Inaba, Yanhe Ahang, Yoshimitsu, Kobashi, Gen Shibata, Hideyuki Ogawa,　“Mechanism of thermal efficiency improvement in twin shaped semi-premixed diesel combustion”, International Journal of Engine Research, Volume 23, Issue 7, page 1237-1247, July 2022
  14. 坂根悠平，菅野椋太，楊 俣睿，小橋好充，柴田元，小川英之，　“過給・EGR条件下におけるディーゼル燃焼の着火遅れとセタン価”，自動車技術会論文集 53巻　2号　PP. 326-331 (2022)
  15. 坂根悠平，山崎泰助，菅野椋太，小橋好充，柴田元，小川英之，　“ディーゼルエンジンにおける着火遅れの運転条件に対する依存性”，自動車技術会論文集 53巻　2号　PP. 320-325 (2022)
  16. Yoshimitsu Kobashi, Tu Dan Dan Da, Ryuya Inagaki, Gen Shibata, Hideyuki Ogawa,　“Optimization of gasoline compression ignition combustion with ozone addition and two stage direct-injection at Middle loads”, International Journal of Engine Research, Volume 23, Issue 2, February 2022
  17. 柴田 元、小川 英之,　“燃料の着火性差異を利用したHCCI燃焼制御”, 日本燃焼学会誌 63, 206, Pages 310-315, 2021年11月
  18. 荒木啓汰，柴山直己，吉田侑平，柴田元，小川英之，小橋好充，清水研一，窪田好浩，　“異なるCu ゼオライト系触媒で適用可能なStandard SCR定常反応モデリング”，自動車技術会論文集 52巻　５号　PP. 1065-1070 (2021)
  19. Gen Shibata, Go Asai, Shuntaro Ishiguro, Yusuke Watanabe, Yoshimitsu Kobashi, Hideyuki Ogawa,　“Fuel reformation by piston compression of rich air-fuel mixture”,　International Journal of Engine Research, Volume 24, Issue 1, September, 2021
  20. Yoshimitsu Kobashi, Masaki Todokoro, Gen Shibata, Hideyuki Ogawa, Toshihiro Mori, Daichi Imai,　“EGR gas composition effects on ignition delays in diesel combustion”, Fuel, Volume 28, 118730, December 2020
  21. Wataru Eijima, Gen Shibata, Naoki Shibayama, Yoshimitsu Kobashi, Hideyuki Ogawa, Kenichi Shimizu,　“Kinetic modeling of steady-state NH3-SCR over a monolithic Cu-CHA”, Catalysis Today, Volume 352, Page 237-242, August 2020
  22. 永島渉，柴山直己，柴田元，小橋好充，小川英之，清水研一，　“モノリスCu-CHA触媒を用いた  NH3-SCR反応メカニズム解析と水蒸気影響のモデリング”, 自動車技術会論文集　51巻　2号  263-267 (2020)
  23. Gen Shibata, Shogo Nishiuchi, Shuntaro Takai, Yoshimitsu Kobashi, Hiroki Kanbe, Eriko Matsumura,　“Fuel adhesion and oil splash on oil-wet cylinder walls with post　　diesel fuel injections”, International Journal of Engine Research, Volume 22, Issue 5, Page 1685-1701, March 2020
  24. Yoshimitsu Kobasi, Yuma Tanaka, Gen Shibata, Hideiyuki Ogawa,　“An investigation of the effects of engine size and rotation speed on diesel combustion based on similarity rules”, SAE Technical Paper, 2019-01-2181, August 2019
  25. Gen Shibata, Kohei Yamamoto, Mikito Saito, Yuto Inoue, Yasumasa Amanuma, Yoshimitsu Kobasi,　“Optimization of combustion noise and thermal efficiency in diesel engines over a wide speed and load operational range”, International Journal of Engine Research, Volume 21, Issue 4, August 2019
  26. Gen Shibata, Shogo Nishiuchi, Puqing Xie, Shuntaro, Takai, Hideyuki Ogawa, Yoshimitsu Kobasi,　“Measurements of fuel adhesion on cylinder walls and fuel wall-flow behavior with post diesel fuel injections”, International Journal of Engine Research Volume 21, Issue 2, June 2019
  27. Kazuki Inaba, Yosuke Masuko, Yanhe Zhang, Yoshimitsu Kobashi, Gen Shibata, Hideyuki Ogawa,　“Thermal efficiency improvements with split primary fuel injections in semi-premixed diesel combustion with multi-peak shaped heat release”, SAE Technical paper 2019-01-2070, August 2019
  28. Go Asai, Yuki Takaoka, Thomas Bayer, Shuntaro Ishiguro, Gen Shibata, Hideyuki Ogawa, Yoshimitsu Kobashi, Yusuke Watanabe,　“A Study of a lean homogeneous combustion engine system with a fuel reformer cylinder”, SAE Technical paper 2019-01-2177, August 2019
  29. Yoshimitsu Kobashi, Usei Oh, Gen Shibata, Hideyuki Ogawa, Kaname Naganuma,　“Ignition control of gasoline compression ignition engine with ozone addition combined with a two-stage direct-injection strategy”, Fuel 249, 154-160, August 2019
  30. 石黒俊太郎，朝井豪，渡邊勇介，柴田元，小川英之，小橋好充，　“気筒内改質ガスを用いた混焼機関の研究（第1報）”, 自動車技術会論文集 20194558, Vol. 50, No. 4, 1024-1029, 2019年7月
  31. 朝井豪，石黒俊太郎，三本連太郎，渡邊勇介，柴田元，小川英之，小橋好充，　“気筒内改質ガスを用いた混焼機関の研究（第2報）”, 自動車技術会論文集 20194559, Vol. 50, No. 4, 1030-1035, 2019年7月
  32. Gen Shibata, Wataru Eijima, Ryutaro Koiwai, Kenichi Shimizu, Yuta Nakasaka, Yoshimitsu Kobashi, Yoshihiro Kubota, Masaru Ogura, Jin Kusaka,　“NH3-SCR by monolithic Cu-ZSM-5 and CU-AFX catalysts: kinetic modeling and engine bench tests”, Catalysis Today, Colume 332, Issue 15, Page 59-63, July 2019
  33. Yuta Nakasaka, Takumi Kanda, Kenichi Shimizu, Kenichi Kon, Gen Shibata, Takao Masuda,　“Micropore diffusivities of NO and NH3 in Cu-ZSM-5 and their effect on NH3-SCR, Catalysis Today, Volume 32, Issue 15, Page 64-68, 2019
  34. Kazuki Inaba, Yosuke Masuko, Yanhe Zhang, Yoshimitsu Kobashi, Gen Shibata, Hideyuki Ogawa,　“Thermal efficiency improvement and its mechanism at low load conditions in semi-premixed diesel combustion with twin peak shaped heat release”, SAE Technical Paper 2019-01-1153, April 2019
  35. 永島渉，小祝隆太郎，柴田元，小橋好充，小川英之，清水研一，草鹿仁，　“アンモニアSCR用Cu-ZSM-5触媒の定常反応モデルの構築”，自動車技術会論文集20194225 Vol. 50, No2, Page 3233-327, 2019年3月
  36. Wataru Eijima, Gen Shibata, Yoshimitsu Kobashi, Ryutaro Koiwai, Hideyuki Ogawa, Kenichi Shimizu, Jin Kusaka,　“Kinetic modeling of ammonia-SCR and experimental studies over monolithic Cu-ZSM-5 catalyst”, SAE Technical paper 2019-01-0024, January 2019
  37. Gen Shibata, Hideyuki Ogawa, Yasumasa Amanuma, Yuki Okamoto,　“Optimization of multiple heat releases in pre-mixed diesel engine combustion for high thermal and  low combustion noise by a genetic-based algorithm method” International Journal of Engine Research, Vol. 20, Issue 5, 2018
  38. 稲葉一輝，小島悠人，小橋好充，柴田元，小川英之，　“噴霧分配型燃焼室を用いた双峰形部分予混合化ディーゼル燃焼（第2報 噴霧分配効果に対する実験的検討）”，自動車技術会論文集 　Vol.49, No.2, Page 211-216, 2018年3月
  39. 稲葉一輝，小島悠人，小橋好充，柴田元，小川英之，　“噴霧分配型燃焼室を用いた双峰形部分予混合化ディーゼル燃焼（第1報 CFD解析による噴霧分配特製の検討）”，自動車技術会論文集 Vol.49, No.2, Page 205-210, 2018年3月
  40. 朝井豪，渡邊勇介，石黒俊太郎，柴田元，小川英之，小橋好充，鈴木拓哉，　“ディーゼル燃料過濃予混合気のピストン圧縮改質”，自動車技術会論文集20184028, Vol. 49, No. 1, Page 24-29, 2017年11月
  41. Hideyuki Ogawa, Akihiro Morita, Katsushi Futagami, Gen Shibata,　“Ignition delays in diesel combustion and intake gas conditions”, International Journal of Engine Research Volume 19, Issue 8, Page 805-812, September 2017
  42. Gen Shibata, Hideyuki Ogawa, Yuki Okamoto, Yasumasa Amanuma, Yoshimitsu Kobashi,　“Combustion noise reduction with high thermal efficiency by the control of multiple fuel injections in premixed diesel engines”, SAE Journal of Engines, 2017-01-0706, 2017
  43. 永島渉，小祝隆太郎，柴田元，小川英之，小橋好充，草鹿仁，植西徹，　“ゼオライト触媒を用いたNH3-SCR反応モデルの開発”，自動車技術会論文集20174198, Vol. 48, No. 2, Page 299-304, 2017年3月
  44. Yoshimietsu Kobashi, Shun Oooka, Lin Jiang, Jun Goto, Hideyuki Ogawa, Gen Shibata,　“An Investigation of the transient DPF pressure drop under cold start conditions in diesel engines”, SAE Technical paper 2017-01-2372, 2017
  45. 中山大輔，岡本雄樹，石井宏樹，柴田元，小川英之，　“熱発生率の双峰化によるディーゼルエンジン燃焼騒音の低減と性能改善”，自動車技術会論文集20164326, Vol. 47, No. 3, Page 649-655, 2016年5月
  46. Hideyuki Ogawa, Gen Shibata, Yuhei Sakane, Tatsuaki Arisawa, Tatsunori Obe,　“Semi-premixed diesel combustion with twin peak shaped heat release using two-stage  fuel injection”, SAE Technical Paper 2016-01-0741, 2016
  47. Gen Shibata, Daisuke Nakayama, Yuki Okamoto, Hideyuki Ogawa,　“Diesel engine combustion noise reduction by the control of timings and heating values in two stage high temperature heat releases”, SAE International Journal of Engines 2016-01-073, 2016
  48. Hideyuki Ogawa, Gen Shibata, Jun Goto, Lin Jiang,　“Performance improvements in a natural gas dual fuel compression ignition engine with 250MPa pilot injection of diesel fuel as an ignition source”, SAE Technical Paper 2016-01-2306, 2016
  49. Gen Shibata, Hideyuki Ogawa, Fukei Sha, Kota Tashiro,　“Impingement and adhesion on cylinder liners with post diesel fuel injections”, SAE Technical Paper, 2016-01-2193, 2016
  50. Hideyuki Ogawa, Hideyuki Nishimoto, Akihiro Morita, Gen Shibata,　“Predicted diesel  ignitability index based on the molecular structures of hydrocarbons”, International Journal of Engine Research, Volume 17, Issue 7, Page 766-775, October 2015
  51. 柴田元，吉田蒼明，鈴木拓也，小川英之，　“SIノッキング条件とHCCI燃焼条件における炭化水素の着火性差異”, 自動車技術会論文集，47巻 1号 PP. 81-86, 2016年1月
  52. Hideyuki Ogawa, Peilong Ahao, Taiki Kato, Gen Shibata,　“Improvement of combustion and emissions in a dual fuel compression ignition engine with natural gas as the main fuel”, SAE Technical Paper 2015-01-0863, 2015
  53. Gen Shibata, Koki Ishii, Hirooki Ushijima, Yushi Shibaike, Hideyuki Ogawa, David E. Foster,　“Optimization of heat release shape and the connecting rod crank radius ratio for low engine noise and high thermal efficiency of premixed diesel engine combustion”, SAE Technical paper, 2015-01-0825, 2015
  54. Hideyuki Ogawa, Yuhei Sakane, Tatunori Obe, Tatsuaki Arisawa, Gen Shibata,　“Low temperature premised diesel combustion with blends of ordinary diesel fuel and normal heptane”, SAE International Journal of Engines 2015-32-0754, 2015
  55. Gen Shibata, Masaki Takahara, Keito Nishikawa, Hideyuki Ogawa,　“Development of micro-reactor HC-SCR system and the evaluation of NOx reduction characteristics”,  SAE Technical paper 2015-01-2021, 2015